I've just seen the "Mini Teardown" where it said about the snap on back.
So I thought, as I can't see any screw holes, I'll see if the Glo has a snap on back.
and it has, so I took it apart and found the internal 2Gb MicroSD card, which is partitioned as below:
partition table is actually as follows:
it looks like the first 9961Kb of the disk contains the u-boot image. Not sure how I'll handle this.
rootfs has a ".macaddress" file which looks like it contains the MAC address (surprise, surprise!)
I've made copies so that I can study them a bit.
any more info and I'll post it here :)
So I thought, as I can't see any screw holes, I'll see if the Glo has a snap on back.
and it has, so I took it apart and found the internal 2Gb MicroSD card, which is partitioned as below:
Code:
partition 1 : ext4 - 268MB - named "rootfs"
partition 2 : ext4 - 268MB - named "recoveryfs"
partition 3 : FAT - 1.4GB - named "KOBOeReader"Code:
Number Start End Size Type File system Flags
1 9961kB 278MB 268MB primary ext4
2 278MB 547MB 268MB primary ext4
3 548MB 1965MB 1417MB primary fat32 lbarootfs has a ".macaddress" file which looks like it contains the MAC address (surprise, surprise!)
I've made copies so that I can study them a bit.
any more info and I'll post it here :)