I recently noticed there is a IRDA infared TX and TX led on the main PCB of the kobo glo
It would appear that maybe this is only used by the manufacturer to load the inital firmware on production maybe
It is located on the pcb behind the CE logo bottme left of the USB cable
I cant see any light coming out of it using my camera as a IT detector
I will post some pictures with the cover off..
you need to drill holes in the case to expose this but its a extra port that I would like to use for my custom kobo hacking I am doing..
does anyone know if its mapped to /dev/ttymxc1 or 2 or maybe the I2c ports found in the dev folder of linux
I know /dev/ttymxc0 is is a console login ( i have wired up a usb to serial adapter and can get root access with zero mods to the kobo firmware
It would appear that maybe this is only used by the manufacturer to load the inital firmware on production maybe
It is located on the pcb behind the CE logo bottme left of the USB cable
I cant see any light coming out of it using my camera as a IT detector
I will post some pictures with the cover off..
you need to drill holes in the case to expose this but its a extra port that I would like to use for my custom kobo hacking I am doing..
does anyone know if its mapped to /dev/ttymxc1 or 2 or maybe the I2c ports found in the dev folder of linux
I know /dev/ttymxc0 is is a console login ( i have wired up a usb to serial adapter and can get root access with zero mods to the kobo firmware